0 Recently Viewed Full-Time Program(s) Download Your Career and Program Guide

Student pours concrete mixture into large mixer.

Concrete Finisher Apprentice


Credential: Apprenticeship
Available: Full Time Classroom

Program Highlights

Learn to place and finish concrete floors, driveways, sidewalks, curbs, bridge decks and concrete structures.


Average Hourly Wage


Periods of Training

Next information session

All information sessions

Tuition and fees per year*

Year 1: $577.96
Year 2: $577.96  

*Tuition, fees, books and supply costs are subject to change


The program requirements are set by Apprenticeship and Industry Training.  

When can you apply?

  • Registration for apprenticeship intakes open on May 15, 2019

Program Details

Program description

If you like to physical and precise tasks while working in a team environment, you will enjoy a career as a concrete finisher. As a concrete finisher, you will place and finish concrete floors, driveways, sidewalks, curbs, bridge decks and other concrete structures.

You will apply architectural, exposed, patterned or stamped, broomed and smooth finishes on concrete surfaces. As a concrete finisher, you will be skilled at repairing, waterproofing and restoring concrete surfaces. You will have the knowledge to properly use dry pack grouting and epoxy materials, and understand how to cure concrete perfectly.

In general, you will place wet concrete into the forms and spread it to a specified depth and level and smooth the surface, round the edges, and make joints or grooves to help control cracking on the surface.

Although machines are used to trowel large areas such as warehouses and arena floors, hand trowelling is still required for hard to reach spots in corners, edges, and around pipes. The surface may be trowelled to a smooth finish, brushed to create a coarse, nonskid finish, embedded with gravel chips for an exposed aggregate finish, patterned or stamped to apply decorative surface and trowelled with a dye to create a coloured surface.

This is a non-compulsory trade – individuals can work in the trade without certification if the employer deems the individual to have the skills of a journeyperson. However, individuals who are working in the trade and learning the trade must become a registered apprentice.

Your career

Start your career by finding an employer who is willing to indenture you as an apprentice. Concrete finishers work both outdoors and indoors, at tasks that are fast-paced and strenuous. Most concrete finishers are employed by general contractors involved in building highways, bridges and large buildings, and by contractors who do only concrete work.

As a journeyperson, you will likely make a wage between $20 - $35 and hour depending on your employer.

After becoming a journeyperson, you may advance to supervisory positions, take on new apprentices or specialize in a particular type of work. Some journeypersons go on to run their own businesses – we can help you build your business with our Blue Seal business certificate.

Student success

Students who have the following characteristics see greater success in the roofing trade:

  • Good communication skills
  • An eye for detail and a desire to do precise work
  • Manual dexterity
  • Ability to work in a team environment 
  • A commitment to safe work habits


Upon successfully completing the required working hours and technical training periods, graduates will be awarded journeyperson status by Alberta’s Apprenticeship and Industry Training. This is a Red Seal Endorsed trade – a recognizable standard that allows tradespeople to work across Canada. 

Admission and Completion

To enter an apprenticeship, you must have the educational qualifications required or recommended education for the trade to which you apply.

Entrance Requirements are monitored and set by Alberta Apprenticeship and Industry Training.

Minimum requirements
Successful completion of the following courses:

  • English 10-2
  • Math 10-3


A pass mark in all five Canadian General Educational Development (GED) tests


Alberta Apprenticeship and Industry Training Entrance Exam

Recommended Path
Apprentices with an Alberta High School Diploma that includes the following courses:

  • English 30-2
  • Math 30-3
  • Physics 20 OR Chemistry 20 OR Science 20
  • Related career and technology studies (CTS) courses

How to register

Registration for technical training is run through Alberta Apprenticeship and Industry Training. Learn how you can register for your next intake.

After you register

Email is the primary source of communication after you have registered for your intake. Please ensure your personal email account is managed appropriately to receive our emails, files and communications. We recommend you add the sait.ca domain to your safe senders' list or you risk missing critical email messages.

Next steps >


Apprentices in the roofing trade will spend 3 years (four 12-month periods) of on-the-job training and technical training at SAIT. Technical training will be 4 weeks each year.

Find an employer willing to indenture you as an apprentice
Apply as an apprentice with AIT and your employer 
Sign contract and recieve record book
Written entrance examination or get approved for previous transcripts
Complete first period of on-the-job-training (1200 hours)
Register at SAIT
Attend first period of technical training for 4 weeks at SAIT
Pass first period Trade Qualification Exam
Complete second period of on-the-job training (1200 hours)
Register at SAIT
Attend second period of technical training for 4 weeks at SAIT
Pass second period Trade Qualification Exam
Complete third period of on-the-job training (1200 hours)
Become a Journeyperson 
Write and pass the Interprovincial Qualification Exam

Technical Training Performance 

To be successful in technical training, an apprentice must pass each section of the course and pass the AIT exam. The passing grade for each section in the course is a 65%. A passing mark on each Trade Qualification Exam and the Interprovincial Qualification (or Red Seal Exam) is 70%.

Alberta's Apprenticeship and Industry Training procedures


Domestic tuition and fees*

Period Tuition fees SAIT fees Saitsa fees Lab & Material fees 2020/21 total
1 $420 $50 $35.96 $72 $577.96
2 $420 $50 $35.96 $72 $577.96


Student support fee: $25
Student technology fee: $25

Books and supplies*

  • Books or modules along with other items for class average out to $600 per period.
  • It is recommended that you do not purchase books or modules ahead of time as they might be outdated by the time you attend classes and they cannot be returned to the bookstore.
  • Personal Protective Equipment will be required for the program, which may be an additional cost to apprentices.

*Tuition, fees, books and supply costs are subject to change.

Wellness centre

Membership to the SAIT Wellness centre - including an ice arena, swimming/diving pool, gymnasium, squash and racquetteball courts and eight room is available to apprentices at a discounted rate.

Financial planning tool

Our apprenticeship cost calculator can help you make a financial plan by identifying and adding up your expected expenses while attending SAIT — find out exactly how much money you need to save, seek or borrow to get you through your studies.


School of Construction

Apprenticeship and Industry Training Client Services

Suite 200 Willow Park Centre  
10325 Bonaventure DR. SE 
Calgary, AB 

Enter Your Search Term Here
Start typing to search SAIT.ca
Refine Results

Search results