Crane and Hoisting Operator - Mobile Crane

Ongoing

Length: 3 periods Credential: Apprenticeship Delivery: Full Time Classroom

Apply now

Next information session

What's up @ SAIT
No events found.
×

Add this calendar to your calendar

Note: Some filters are being applied, so the exported content is being filtered.
Upcoming Information Sessions

Overview

Learn to service and operate the hoist and swing equipment used to move machinery, materials and other large objects. 

If you like to work independently and are a capable decision-maker, you'll enjoy a career as a mobile crane operator. You'll service and operate booms that are mounted on crawlers or wheeled frames as well as travelling, fixed or climbing type hoisting equipment with a vertical mast or tower and a jib.

You'll manipulate a number of pedals and levers to rotate the crane and raise and lower its boom and one or more load-lines. Some or all of these operations may be performed simultaneously.

Certification is required when operating mobile cranes with a lifting capacity of fifteen tons (13.6 tonnes) and over. You may drive the crane to the job site, rig the machine up (pin the boom and pendant cables and pull the hoist cable in preparation for operation), and set up the machine for the lift (make it level and stable) using blocking and levelling materials.

This is a compulsory trade - to work in this trade you need to hold a recognized trade certificate or be a registered apprentice.

Is this the right fit for me?

Students who have the following characteristics see greater success in the roofing trade:

  • coordination and manual dexterity
  • the ability to work at heights
  • the strength, stamina, and ability to use proper lifting techniques to lift items weighing in excess of 25 kilograms
  • good vision
  • the ability to work as part of a team and communicate with ground crews, usually using hand signals and voice communication
  • a commitment to safe work habits

Credentials

Upon successfully completing the required working hours and technical training periods, graduates will be awarded journeyperson status by Alberta’s Apprenticeship and Industry Training. This is a Red Seal Endorsed trade – a recognizable standard that allows tradespeople to work across Canada. 

Read more

Career opportunities

Start your career by finding an employer who is willing to indenture you as an apprentice or gain experience with our Pre-Employment Mobile Crane program. Mobile crane operators are employed by general contractors and subcontractors in the forestry, mining, construction and oil industries, and by crane rental companies. Employment prospects change with seasonal and economic climates. Many crane operators are members of unions. Crane and hoisting equipment operators–mobile crane (mobile crane operators) work outdoors, often in noisy, dusty conditions.

After becoming a journeyperson, you may advance to supervisory positions or take on new apprentices. Some journeypersons go on to run their own crane rental businesses – we can help you build your business with our Blue Seal business certificate.

$24 - $38
Average hourly wage
3
Periods of training

Tuition and fees per year*

Year 1: $805.94
Year 2: $ -
Year 3: $805.94

*Tuition, fees, books and supply costs are subject to change

Requirements

The program requirements are set by Apprenticeship and Industry Training.  

When can you apply?

  • Registration for apprenticeship intakes open August 2020

Immersive technologies used in SAIT classrooms

Students at SAIT expand their classroom experiences through extended reality.

Admission and completion

To enter an apprenticeship, you must have the educational qualifications required or recommended education for the trade to which you apply.

Entrance Requirements are monitored and set by Alberta Apprenticeship and Industry Training.


Minimum requirements
Successful completion of the following courses:

  • English 10-2
  • Math 10-3

OR

A pass mark in all five Canadian General Educational Development (GED) tests

OR

Alberta Apprenticeship and Industry Training Entrance Exam


Recommended Path
Apprentices with an Alberta High School Diploma that includes the following courses:

  • English 30-2
  • Math 30-3
  • Physics 20 OR Chemistry 20 OR Science 20
  • Related career and technology studies (CTS) courses

How to register

Registration for technical training is run through Alberta Apprenticeship and Industry Training. Learn how you can register for your next intake.

Apprenticeship and Industry Training Client Services
1.800.248.4823
tradesecrets.alberta.ca

Suite 200 Willow Park Centre   
10325 Bonaventure DR. SE 
Calgary, AB

After you register

Email is the primary source of communication after you have registered for your intake. Please ensure your personal email account is managed appropriately to receive our emails, files and communications. We recommend you add the sait.ca domain to your safe senders' list or you risk missing critical email messages.

Next steps >

Courses

Apprentices in this trade will spend 3 years (four 12-month periods) of on-the-job training and technical training at SAIT. Technical training will be 6 weeks each year.

Find an employer willing to indenture you as an apprentice
Apply as an apprentice with AIT and your employer 
Sign contract and receive record book
Written entrance examination or get approved for previous transcripts
Complete first period of on-the-job-training (1620 hours)
Register at SAIT
Attend first period of technical training for 6 weeks at SAIT
Pass first period Trade Qualification Exam
Complete second period of on-the-job training (1620 hours)
Complete third period of on-the-job training (1560 hours)
Register at SAIT
Attend third period of technical training for 6 weeks at SAIT
Pass third period Trade Qualification Exam
Become a Journeyperson 
Write and pass the Interprovincial Qualification Exam

Technical Training Performance 

To be successful in technical training, an apprentice must pass each section of the course and pass the AIT exam. The passing grade for each section in the course is a 65%. A passing mark on each Trade Qualification Exam and the Interprovincial Qualification (or Red Seal Exam) is 70%.

Alberta's Apprenticeship and Industry Training procedures

Costs

Domestic tuition and fees*

Period Tuition fees SAIT fees Saitsa fees Material & Lab 2020/21 total
1 $630 $50 $53.94 $72 $805.94
2 - - - - -
3 $630 $50 $53.94 $72 $805.94

SAIT Fees

Student support fee: $25 
Student technology fee: $25

Books and supplies*

  • Books or modules along with other items for class average out to $600 per period.
  • It is recommended that you do not purchase books or modules ahead of time as they might be outdated by the time you attend classes and they cannot be returned to the bookstore.
  • Personal Protective Equipment will be required for the program, which may be an additional cost to apprentices.

*Tuition, fees, books and supply costs are subject to change.

Wellness centre

Membership to the SAIT Wellness centre - including an ice arena, swimming/diving pool, gymnasium, squash and racquetteball courts and eight room is available to apprentices at a discounted rate.

Financial planning tool

Our apprenticeship cost calculator can help you make a financial plan by identifying and adding up your expected expenses while attending SAIT — find out exactly how much money you need to save, seek or borrow to get you through your studies.

Have questions about this program?

Contact us at

School of Transportation
403.210.4020
transportation.info@sait.ca

More programs you may like

  • Full Time
  • Classroom
  • Certificate
  • Closed for Winter 2021
  • Full Time
  • Classroom
  • Apprenticeship
  • Ongoing
  • Full Time
  • Classroom
  • Apprenticeship
  • Ongoing
  • Full Time
  • Classroom
  • Apprenticeship
  • Ongoing
Browse all apprenticeship and pre-employment programs
Enter Your Search Term Here
Start typing to search SAIT.ca
 
REFINE RESULTS
Refine Results
 
 


Search results